Multimotor Exportfrom 1 from € 768,00 Incl. 19,00% VAT
Combinable Gemstoneworker for Hobby- and Professional grinding.
Length 45 cm, height 22 cm, weight 14 kg.
Rigid, long-life, made of cast iron. Designed for extreme continuous operation (particularly quiet).
On 4 fold ballraced, grinded, stainless steel Welle (concentricity 1/100 mm) disc change is possible within seconds due to the patented quick clamp flange.
Accessories - like saw, beveling und wet grinding device - can be quickly attached to the bearing shield flange with 60 mm diameter using 1 clamping bolt at both sides.
2 speeds - 700 U/min or 1400 U/min, with 2 flanging possibilities for accessories, smooth shaft Ø 15 mm, pole toggle switch, plug with cord and foot.
from 1 from € 726,00 Incl. 19,00% VAT
Bendable shaft for Multimotors
For grinding, polishing, brushing, milling, drilling, engraving and retouching. Also for mounting of putty pens for working gemstones.
For working difficult to access locations, if the dimensions or the weight of the workpiece require the use of a bendable shaft.
Equipped with a keyed chuck clamping 1..10 mm,
inside cord with diameter 8 mm made of 6 layers steel. Rotational direction right, maximum 8000 rotations / min. Axle in the handle and driving element with ball bearings.
Flexible shaft with chuck 1..10 mm, adapter with center hole 15 mm diameter. For attachment to MULTI-motors, special countershaft and ball bearing countershaft.
from 1 from € 174,00 Incl. 19,00% VAT
Spezialvorgelegefrom 1 from € 286,00 Incl. 19,00% VAT
Area-, Faceting unit
for multimotors Export and Simplex or special countershaft. For polished section, thin section, spherical grinding.
Suitable for stones up to (5 x 5) cm.
Disc diameter 150 mm.
Includes carrying disc for polishing discs, with driven wheel on quick clamping flange, stainless shaft, 2 ball bearings. Thread M 13x1.5 right.
By moving the drive wheel on the motor shaft and due to the motor with 2 speeds - (700 | 1400) U/min - every arbitrary number of revolutions between 300 revolutions per min and 1200 revolutions per min can be set on the horizontally running disc.
The area and faceting unit can be mounted on both sides of the motor using a clamping screw. At this the left side should preferably be used for polishing because because screwed on discs, like for example the cast iron disc, may get loose.
Complete with with carrying disc and disc mounting parts, drive wheel on flange, motor mount, supporting surface for facet heads and water drain connection 1/2".
Steinsägeeinrichtungfrom 1 from € 520,00 Incl. 19,00% VAT
Quick clamping flange zinc coating galvanized and yellow passivated for 2 grinding or polishing discs at the same time, suitable for Multi-Motors and Special countershafts with shaft diameter 15 mm.
All our quick clamping flanges allow a disc change within seconds, without renewed truing off or balancing.
from 1 from € 108,00 Incl. 19,00% VAT
Wet grinding device
Fitting to MULTI-Motors EXPORT and SIMPLEX or the Special countershaft. It can be attached to both sides of the motor.
from 1 from € 291,00 Incl. 19,00% VAT
Drill chuck Multimotor
Precision drill chuck on flange.
Keyed chuck for receiving of grinding and polishing or diamond bodies.
For Multimotors and Special countershafts with shaft diameter 15 mm.
With quick clamping flange 1..10 mm, 1..13 mm or 3..16 mm.
from 1 from € 87,00 Incl. 19,00% VAT
Grinding beltTo the grinding and polishing drum. Korund-sanding belt endless 470 x 60 mm. Grain size 120 water resistant.
from 1 from € 4,20 + € 6,00/item Incl. 19,00% VAT
Gummitrommel mit Schnellspannflansch (für Multimotoren)from 1 from € 190,20 Incl. 0,00% VAT
Polierband Wollfilzfrom 1 from € 19,50 Incl. 19,00% VAT